CARE GUIDE · Silicone, clear and printed cases
How to clean a phone case. 7 tips to keep a silicone, clear or custom printed case looking new.
Phone cases collect dust, skin oils and stains faster than almost anything we own. Here is how to clean each type of case safely, what to do when a clear case turns yellow and how to protect a printed design.
Design a new case
In this guide
Key takeaways
- Take the phone out of the case before cleaning, and let the case dry completely before you put it back.
- For most cases, warm water, a drop of dish soap and a soft brush are all you need.
- Use a baking soda paste for stubborn stains on silicone and clear cases.
- A clear case that turned yellow can be cleaned, but yellowing from sunlight usually cannot be fully reversed.
- On printed cases, avoid bleach, acetone and hard scrubbing on the print.
Tip 1
The basic cleaning method (works for most cases)
- Remove the case from the phone.
- Mix warm water with a few drops of mild dish soap.
- Clean the case with a soft cloth or a soft toothbrush, paying attention to corners and cutouts.
- Rinse with clean water.
- Dry with a microfiber cloth and let it air-dry fully before putting the phone back.
Doing this every few weeks keeps dust and oils from building up.
Tip 2
How to clean a silicone phone case
Silicone and gel cases attract lint and dust. Wash them with soapy water as above. For stains, make a paste of baking soda and a little water, rub it gently with a soft toothbrush, then rinse well.
Lint that sticks to the surface can be removed with a piece of tape or a lint roller.
Tip 3
How to clean a clear phone case that turned yellow
Clear cases turn yellow mainly because of sunlight (UV light) and the natural ageing of the material. Dirt and skin oils make it look worse.
- Wash the case with soap and water first.
- Then use a baking soda paste on the yellowed areas and rinse.
- Some people also use a mix of water and a little white vinegar for dull spots.
Honest note: cleaning removes dirt, but yellowing inside the material usually does not fully disappear. If your clear case is very yellow, it may be time for a new one.
Tip 4
How to clean a custom printed case without damaging the print
A custom case with your photo is made for everyday use, but the print deserves a gentle hand:
- Use soapy water and a soft cloth, not a stiff brush, on the printed side.
- Do not use bleach, acetone, nail polish remover or abrasive cleaners.
- Pat dry instead of rubbing hard.
Tip 5
How to disinfect a phone case
To disinfect, wipe the case with a cloth lightly dampened with 70% isopropyl alcohol and let it dry. This is fine for most silicone, TPU and hard plastic cases. Test on a small area of a printed case first and do not soak it.
Tip 6
How to clean a leather or synthetic leather case
Do not put a leather or synthetic leather case under running water. Wipe it with a slightly damp cloth, then dry it with a soft cloth.
Tip 7
Daily habits that keep a case new for longer
- Keep your phone out of direct sun, for example on a car dashboard.
- Do not keep keys or coins in the same pocket.
- Clean your hands after using lotion or sunscreen, which can stain light cases.
- Take the case off now and then to clean the phone itself and remove sand or dust from inside.
Design a new case with your photo or name, printed for your exact phone.
Frequently asked questions
Can I clean a phone case with baking soda?
Yes. A paste of baking soda and water, applied gently with a soft toothbrush, works well on silicone and clear cases. Rinse it off well afterwards.
How do I get a clear phone case white again?
Clean it with soapy water and then a baking soda paste. This removes dirt, but yellowing caused by sunlight usually cannot be fully reversed.
Can I put a phone case in the dishwasher?
We do not recommend it. High heat can warp the case and damage a printed design. Wash it by hand.
How often should I clean my phone case?
A quick wipe every week and a full wash every few weeks keeps most cases clean.
Keep reading
Ready for a case
you will love to keep clean?
Create a custom case with your own photo, printed for your exact model.
Start designing